隧道光亮度檢測儀是保障隧道行車安全的關鍵設備，基于光電轉換技術，通過高靈敏度光敏元件（如硅光電二極管）實時監測隧道內外光照強度。其測量范圍達0～7500cd/m2，精度0.1cd/m2，響應時間低于毫秒級，可快速適應光照突變。設備具備IP68防護等級，能在-50℃至+70℃環境下穩定運行，支持RS485等數字接口，可實現遠程監控與數據存儲，動態調節照明以消除“黑洞效應"和“白洞效應"，降低能耗與事故風險。

隧道光亮度檢測儀能滿足整個隧道照明控制的要求，預置控制模式的控制器根據光源測量值按預設參數自動進行切換照明開關，為隧道照明提供了優良值。它的設計符合CIE關于隧道照明測量的要求，并能滿足《公路隧道通風照明設計規范》，而且它的整體設計能滿足野外惡劣的工作環境地要求。

安裝方式：

隧道光強度監測儀安裝在隧道內指定區域的墻壁上，為了避免因事故或汽車殘骸對其的損傷，需安裝在4m左右的高度，距隧道入口大于10m的適當位置。隧道光亮度監測儀安裝在隧道外高度距路面4m左右，距隧道入口120—200m左右的適當位置。具有高可靠性和低維護量.最新微處理器技術，數字化運行，安裝調試簡易。

The tunnel luminance detector is a key device to ensure traffic safety in tunnels. Based on photoelectric conversion technology, it monitors the illumination intensity inside and the tunnel in real time through high-sensitivity photoelectric sensitive elements (such as silicon photodiodes). Its measuring range reaches 0-7500cdm2, with an accuracy of 0.1cd/m2 and a response time below the millisecond level, which can quickly adapt to sudden changes in illumination. The has an IP68 protection grade and can operate stably in the environment of -50℃ to  70℃. It supports digital interfaces such as RS485 which can achieve remote monitoring and data storage. It can dynamically adjust lighting to eliminate the "black hole effect" and "white hole effect", reduce energy consumption and accident risk